Posts Tagged ‘Untethered’

iOS 4.3.3 Untethered Jailbreak Using Sn0wbreeze 2.7.1 Guide

Written by Gradly on . Posted in Apple, blog, Download, Featured, How To, iPad, iPhone, Jailbreak

Sn0wbreeze 2.7.1 (a.k.a PwnageTool for Windows) brings untethered jailbreak for iOS 4.3.3 on iPhone 4, iPhone 3GS, iPod Touch 4G, iPod touch 3G, & iPad 1. It allows who rely on unlock to keep their old baseband on iOS 4.3.3 so that they can use ultrasn0w to unlock their devices later.

A step by step guide on how to jailbreak iOS 4.3.3 untethered using Sn0wbreeze 2.7.1 (Windows)

Note: For Redsn0w you can follow our guide posted here (Redsn0w 0.9.6rc16) to get untethered jailbreak iOS 4.3.3. For PwnageTool you can check the post here (PwnageTool 4.3.3.1).

Step 1: Start Sn0wbreeze, click the next “blue” arrow to proceed.

Step 2: Select the required firmware .ipsw file for your iOS device by clicking on the “Browse” button.

Step 3: Sn0wbreeze will now identify the selected IPSW file. Once done, click the next “blue” colored arrow to proceed.

Step 4: Now select the “Expert Mode”, followed by “Build IPSW” option to start creating your custom firmware.

Step 5: Sn0wbreeze will greet you with the following “Done!” message when the custom firmware has been successfully created.

Step 6: Now follow the onscreen steps to enter DFU mode using Sn0wbreeze:

  • Hold Power and Home buttons for 10 seconds
  • Now release the Power button but continue holding the Home button for 10 more seconds
  • You device should now be in DFU mode

Step 7: Start iTunes, click on your iOS device icon from the sidebar in iTunes. Now press and hold Left “Shift” button on the keyboard and then click on “Restore” (Not “Update” or “Check for Update”) button in iTunes and then release this button. This will make iTunes prompt you to select the location for your custom firmware 4.3.3 file. Select the required custom .ipsw file that you created above, and click on “Open”.

Step 8: Now sit back and let iTunes do the rest for you. This will involve a series of automated steps. Just wait while iTunes installs the new firmware 4.3.3 on your iOS device. Your iOS device screen at this point will be showing a progress bar indicating installation progress. After the installation is done, your iOS device will be jailbroken on iOS 4.3.3.

Required Downloads:
Update:
Sn0wbreeze 2.7.1 updated to fix Silent and Mute Button issues

iOS 4.3.3 Untethered Jailbreak Using PwnageTool 4.3.3.1 Guide

Written by Gradly on . Posted in Apple, blog, Download, Featured, How To, iPad, iPhone, Jailbreak

PwnageTool 4.3.3.1 brings untethered jailbreak for iOS 4.3.3 on iPhone 4, iPhone 3GS, iPod Touch 4G, iPod touch 3G, iPad 1 and AppleTV. Its the same like Redsn0w 0.9.6rc16 but allows who rely on unlock to keep their old baseband on iOS 4.3.3 so that they can use ultrasn0w to unlock their devices later.

A step by step guide on how to jailbreak iOS 4.3.3 untethered using PwnageTool 4.3.3.1 (Mac)

Note: For Windows users you can follow our guide posted here (Redsn0w 0.9.6rc16) to get untethered jailbreak iOS 4.3.3

Step 1: Run PwnageTool in “Expert mode” and then select the device you want to jailbreak.

Step 2: Browse for iOS 4.3.3 IPSW firmware for your device.

Step 3: Click on“Build” -as shown in the below screenshot- to start creating custom 4.3.3 firmware file

Step 4: PwnageTool will now start building your custom 4.3.3 .ipsw file for your device

Step 5: Now follow the following steps to enter DFU mode using PwnageTool:

  • Hold Power and Home buttons for 10 seconds
  • Now release the Power button but continue holding the Home button for 10 more seconds
  • You device should now be in DFU mode

Step 5: Now restore your device to your pre-jailbroken custom 4.3.3 .ipsw files by doing this:

Step 6: Start iTunes.

Step 7: Click on your device icon from the sidebar in iTunes.

Step 8: Press and hold left “alt” (option) button on Mac, or Left “Shift” button if you are on Windows on the keyboard and then click on “Restore” button in the iTunes and then release this button. Now iTunes asking you to select the location for your custom firmware 4.3.3 file. Select the pre-jailbroken custom 4.3.3 firmware .ipsw file, then click on “Open”.

Step 9: iTunes will now restore the firmware on your iOS device. (this will take 10 minutes) then enjoy your untethered jailbreak on iOS 4.3.3

Supported devices:
  • iPhone 4, 3GS
  • iPod Touch 4G, 3G
  • iPad 1 (Unfortunately iPad 2 still not supported)
  • Apple TV 2G.
Required Downloads:
Update:
PwnageTool 4.3.3.1 updated to Fix Side Switch and Vibration Issues

iOS 4.3.3 Untethered Jailbreak Using Redsn0w 0.9.6rc16 Guide

Written by Gradly on . Posted in Apple, blog, Download, Featured, How To, iPad, iPhone, Jailbreak

Redsnow brings untethered jailbreak for iOS 4.3.3 on iPhone 4, iPhone 3GS, iPod touch 4G, iPod touch 3G and iPad. iOS 4.3.3 untethered jailbreak is based on i0n1c’s untethered exploit. No Untethered Jailbreak for iPad 2 yet.

A step by step guide on how to jailbreak iOS 4.3.3 untethered using Redsn0w 0.9.6rc16 (Win / Mac)

Note: If you rely on ultrasn0w unlock don’t follow this guide, you have to follow This Guide (PwnageTool 4.3.3) to preserve your old baseband to unlock with ultrasn0w

Step 1: Download iOS 4.3.3 for iPhone, iPad or iPod touch (download links at the end).

Step 2: Restore to iOS 4.3.3 in case you haven’t yet using the IPSW file you just downloaded via iTunes 10.2.2.

Step 3: Start Redsn0w and point it to the official iOS 4.3.3 firmware file.

Step 4: Now select “Install Cydia” and click “Next”. Optionally (if available), you can also select any other option you like.

Step 5: Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.

Now you will be guided on how to enter DFU mode. Quickly hold “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.

Step 6: Wait until you get untethered iOS 4.3.3 jailbroken in few minutes.

Update:
New version RedsnOw 0.9.6rc16 to Fix Side Switch and Vibration Problems

Untether a Tethered Verizon iPhone with iOS 4.2.7 Jailbreak Tool

Written by Gradly on . Posted in Apple, blog, Download, How To, iPhone, Jailbreak, News

You can now untether iOS 4.2.7 jailbreak on Verizon iPhone 4 by installing a simple package from Cydia on a previously tethered device and it will become untethered, it’s that easy:

  • Launch Cydia and add the following rep: http://cydia.pushfix.info
  • Search for “Verizon Untether 4.2.7″ and install the package
  • Reboot your iPhone

Jailbreaking the Verizon iPhone on iOS 4.2.7 is the same as jailbreaking 4.3.1 using redsn0w, but remember to download the iOS 4.2.7 IPSW for the CDMA iPhone 4.

Pin It on Pinterest